More Views

Sony 7" Outdoor Pressurized Pendant Housing with H/B, Clear Dome, UNI-OPL7C2

Be the first to review this product


  • For Outdoor Dome Cameras
  • 7" (18 cm) Clear Dome
  • UV-Protected / 94VO Flame-Rated
  • For Pendant Mounting
  • Pressurized to 7 psi
  • Schrader & Pressure Relief Valves
  • Durable Engineered Plastic Enclosure
  • 24 VAC Heater & Blower
  • Meets IP67 & NEMA-4x Standards
  • Corrosion-Protected Enclosure

Availability: In stock



7" Outdoor Pressurized Pendant Housing with H/B for SNC-RX, RH, RS , EP/ER and W series PTZ cameras, AC 24V, Clear Dome.
The Sony UNIOPL7C2 7-inch Pressurised Outdoor Dome Housing (Clear Bubble) offers excellent protection to the SNC series cameras from rain, snow, wind, dust, pollution, and insects. For maximum protection from the elements, this outdoor housing uses internal pressure produced by dry nitrogen to seal off even the smallest openings. The Schrader valve of the housing maintains the pressure in the housing, while the pressure relief valve helps release excess pressure. In addition, an integrated heater and blower system shields the camera in low temperatures and prevents the lower bubble from fogging up in high humidity. Made of durable engineered plastic, the top body of the housing is flame-retardant and UV protected, making it an excellent choice for installation in outdoor and high-risk locations. Designed for discreet surveillance, the housing is equipped with a clear lower dome that helps in maximum light transmission.

  • Designed for the SNC-RS44/46, SNC-RH124, SNC-RZ25, SNC-RX, SNC-EP/ER 520/550/580, and SNC-ZR550/ZP550 Outdoor Dome Cameras
  • 1.5” NPT quick connect coupling
  • Creates a constant pressure within the inner housing
  • Pressurized to 7 psi to maintain pressure for 2-3 years
  • Schrader valve to fill the housing with dry nitrogen
  • Relief valve prevents over-pressurization of the enclosure
  • 10-pin hermetically sealed connector located at the top of the housing for power, video, and control functions
  • Upper body of the 7" (177.8 mm) housing is made of plastic and is 94 VO flame-rated
  • Dome shell is constructed from optically clear thermoplastic polycarbonate
  • Equipped with a 24 VAC input blower and a thermostatically controlled 50 W heater that turns on and off at 60°F (15°C) and 80°F (27°C) respectively
  • 24-hour fan operation for effective protection against heating and condensation
  • Corrosion protection makes it ideal for use in harsh weather conditions
  • Water-proof IP67-rated housing provides protection against dust and water
  • Designed to meet NEMA 4x for water ingress
  • 12 VDC with pre-terminated cable/plug for camera is present inside the enclosure
  • Includes 24 VAC to 12 VDC power supply for the camera

  • Specifications:

    Manufacturer Sony
    Environment Type OUTDOOR
    Mounting Type PENDANT
    Special Property PRESSURIZED
    Voltage/Current Type 24 VAC

    Additional Information


    Write Your Own Review

    You're reviewing: Sony 7" Outdoor Pressurized Pendant Housing with H/B, Clear Dome, UNI-OPL7C2

    How do you rate this product? *

      1 star 2 stars 3 stars 4 stars 5 stars

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.


    You may also be interested in the following product(s)

    AXIS Conversion Lens 0.3X, 5507-301

    AXIS Conversion Lens 0.3X, 5507-301

    Sony 7" Outdoor Pressurized Pendant Housing with H/B, Tinted Dome, UNI-OPL7T2

    Sony 7" Outdoor Pressurized Pendant Housing with H/B, Tinted Dome, UNI-OPL7T2

    Axis Acc Lens Converter 0.5X FOR Q1755, 5500-501

    Axis Acc Lens Converter 0.5X FOR Q1755, 5500-501